Designed to integrate seamlessly with our solar panels, monitor and regulate solar input for 12V batteries. Equipped with an 8mm Solar Connector, LED screen, and an IP65 rating, this unit is weather-resistant and dustproof.
What’s In the Box
- 20A Charge Controller
- Spade to HPP Cable
BATTERY DETAILS
- Charge Controller: PWM
- Rated solar panel amps GZ-10: 20A
- Normal input solar cell array voltage: 15-22V
- Max solar cell array voltage (output has no load): 25V
- Lowest operating voltage at solar or battery side: 8V Minimum
- Charging Characteristics:
- Start Voltage at 25°C: 3-10V
- Charge Voltage at 25°C:
- LTO battery: 14.0V
- Gel battery: 14.1V
- LiFePO4 battery: 14.4V
- Charge Voltage at 25°C: AGM battery-14.4V
- WET battery: 14.7V
- Calcium battery: 14.9V
- Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
- Float Voltage at 25°C:
- Gel, AGM, WET, Calcium batteries-13.6V
- LTO and LiFePO4 batteries-13.4V
- Battery temperature compensation
coefficient: -24mV/°C
PORTS
- Input/Output terminal: M5 terminals
- Solar Input Port (High Power Port): 14-23V, up to 14A
- Fuse: 25A replaceable
GENERAL
- Product SKU: 96110
- Weight: 17.6 oz (499 g)
- Dimensions: 6.10 x 3.90 x 1.02 in. (15.5 x 9.91 x 2.6 cm)
- IP Grade: IP65
- Spade to HPP Cable Length: 3 ft
- Operating temperature: -25 to 50°C/ -13 to 122°F
- Warranty: 12 Months
- Certs: IC, FCC, CE-EMC, CE-LVD